Musiclily Pro 13-Hole Guitar Pickguard for USA Vintage 60s Jazzmaster and SQ Classic Vibe, 3Ply/ 4Ply

Got this to swap onto my 2024 Squier J Mascis Jazzmaster. It fit very well with no sanding needed. A couple of the holes didn't line up exactly, but I was still able to get the screws in; the only one that didn't line up at all was the one below the input jack. Overall it looks great and is super affordable. 8/10

Great fit on a CV 60s Jazzmaster. Roughly 1mm smaller all around, but holes line up perfectly.

Fit great, the only challenge I had was the output jack hole didn��t perfectly line up with the metal shield this instrument included, a sliver of the shield was visible in the pick guard hole blocking the jack from fitting. I was going to drill out the shield a little bit but instead simply bent the pick guard and shield upwards slightly at that end, which caused the holes to better align, which let me push the Jack through the holes, and then installed and screwed it down no problem. Looks soooo much better than the factory plain vintage white. Really jazzed up the guitar (see what I did there?). They even included the little neck truss rod carve for these vintage instruments. Though it made me realize my volume and tone knobs don��t match the pickup covers exactly, which I somehow didn��t notice before.

Good guard at a good price, fits snugly.

Comes w/ 2 layers of peel-off plastic on top. Well made, I could not differentiate it from an official Fender product. I shielded mine w/ copper tape (vs. buying one of the ~$25 aluminum shields). (There's a video on line where the fella had to buy a new bracket for the pickup dials, cuz his screw holes were closer together... that was not the case w/ mine. Screw locations were perfectly on for all hardware mounts as well as screwing the pickguard to body).