Wilkinson M Series スタックP90 ソープバー セラミック ハムバッカーサイズのシングルコイルブリッジピックアップ 16K SG LPエレキギターブリッジ用 ブラック

Doesn��t fit the p90 space in my guitar

These pickups are quiet but for 15 K's they are not loud. In single coil mode they give you more volume as it often is the case with stacked humbuckers.

The pickup is about 90% noiseless. I put it in an Epiphone Lp Special, I had to router the cavity deeper to fit. So to install takes some work but was worth the effort. Has really good output also

I received this yesterday and had no problems installing it into the bridge position of my singlecut. On the positive side, there was no hum.The two big negatives, however, are that it is a lot thicker than a regular P 90 suis it very high to the strings and there��s no way to get a lower without literally cutting wood out of the guitar. Additionally, the output is very low. I had to lower the neck pick up to compensate and it is still a lot louder than this. I double checked my wiring by redoing it twice just to make sure that I had it correct. No issues there.I do like the sound but I hate the volume is so low.

Item not as described.This is NOT ��humbucker size��, and the mounting screws are barely long enough to go through the pickup. Let alone long enough to install the springs and make it adjustable. Pickup is 1�� tall, the springs are also 1��, and the supplied screws are 1.25��. Even without the springs, the huge clump of solder on the bottom holding the ground makes the pickup too tall for the 1/4�� of thread left to grab into the guitar. We should not have to source our own screws because of your laziness!Will give an update when i finally get this mounted. So far not impressed at all. This is ridiculous.