Puente de bajo fijo Musiclily Basic de 57 mm (2-1/4 pulgadas) con carga superior para bajos Fender Precision y Jazz Bass de 4 cuerdas

Compré esto para mejorar el puente original de un Squier Affinity P-Bass como regalo de Navidad para mi hija. Tiene una sensación sólida y de gran masa, y los agujeros para los tornillos coincidieron perfectamente con los del bajo. Suena bien, y hasta ahora no hay ruidos ni resonancias extrañas. ¡Excelente valor! Consejo útil: Si los agujeros de los tornillos en tu bajo parecen desgastados, puedes usar un tornillo ligeramente más largo para asegurar el nuevo puente. Normalmente, los tornillos originales son de 1", pero usé tornillos #6 de 1-1/4", lo que resultó en un ajuste muy seguro y firme.

Easy swap on a Squier P-Bass. The screws to attach the bridge to the body are smaller than stock. I reused the stock screws to install the bridge to the body. The saddles happened to be nearly identical to the stock bridge's but better finished. I was worried that the provided saddle length adjustment screws were too short on the E and A strings but they are ok. The bridge weighs more than the door hinge that is on stock Fenders but I don't think it makes a huge difference in sound or sustain. It looks better for sure. It has a good quality feel.If the bridge you are removing is set up ok, adjust the new bridge saddle length as close as possible before you install it. If the baseplate ok n the new bridge is thicker than on the old bridge, adjust the height of the saddles lower to compensate. A small Allen wrench is provided.

Compré esto para actualizar el puente de un bajo de un amigo que estaba en bastante mal estado. Este puente está fabricado mucho mejor de lo que sugiere el anuncio. Sin duda, es una mejora con respecto al puente estándar de un Jazz Bass. El metal es más grueso, por lo que el puente es más sólido y tiene mejor sustain. Fácil de instalar, fácil de ajustar y funciona bien.

This is a really nice bridge for the money. I bought this not being certain it would fit my SX 2 MN Jazz Bass guitar. The stock bridge was way off on intonating my E string. I have two other SX bass guitars but don't have this issue, their setups are fine. This bridge is has a bit larger footprint and it's a comparatively more massive (weight) bridge but it is an exact fit. This bridge doesn't have the two screws in the front but the new bridge covers the those holes. The back five holes were exact and the installation went without a hitch. I just set up all intonations and they are now spot on. My SX P Bass appears to have the same stock bridge but thus far the action and intonations are right on so if it ain't broke, don't fix it.

This bridge was a good replacement for the chrome bridge on my Ibanez Gio GSR200. Instead of using four screws in the corners, it requires 5 holes along the bottom. On my bass, the new bridge barely covered the old holes - so I had to be super precise.