Salta il contenuto

Musiclily Pro ST-DPMA Alnico 5 Riga Lama Bobina Singola Dimensione Humbucker Pickup 9.2K per Chitarra Elettrica dello Stile Strat

SKU MX3248BK
Prezzo originale $17.72 - Prezzo originale $17.72
Prezzo originale
$17.72
$17.72 - $17.72
Prezzo attuale $17.72
Disponibilità:
Solo 1 a sinistra!
  • Adatto per chitarra elettrica in stile Strat, tutte le posizioni (manico/middle/bridge).
  • Pickup a singolo avvolgimento con lama di traverso, dotato di magneti Alnico 5, suona profondo e pieno, con una potenza media, più potenza è concentrata nei medi e bassi per un suono più ampio con più croccantezza. Avvolgimenti dual-risonanza con poli a doppia lama permettono la migliore copertura delle corde e chiarezza, offrono un'eccezionale performance di cancellazione del rumore, specialmente per le note che vengono piegate sulle tastiere più alte.
  • Lunghezza del binario: 62 mm (2-7/16 pollici), distanza tra i fori per le viti di montaggio: 76,5 mm (3-1/64 pollici)
  • Resistenza: 9,2K, induttanza: 5,4H. Tolleranza: 0,5K per la bobina singola, 1K per il humbucker. Il valore della resistenza cambierà in base alla temperatura e all'umidità. Di solito, il valore della resistenza sarà alto in condizioni di caldo e aria secca, basso in condizioni di freddo e umidità. In casi estremi, la tolleranza del valore della resistenza sarà maggiore. Magnet: Alnico 5; bobina PC; base in fibra, cablaggio: 4P Shield
  • Contenuto della confezione: 1 pezzo di accessori per cattura audio e montaggio. Nota: I nostri viti potrebbero non essere adatte al tuo utilizzo, utilizza le tue se possibile.
    Colore : Binario cromato corpo nero

    Customer Reviews

    Based on 28 reviews
    86%
    (24)
    7%
    (2)
    7%
    (2)
    0%
    (0)
    0%
    (0)
    S
    Sasa Miletic

    The pickup is surprisingly well made.I installed it as a neck pickup in my Thinline CV with Seymour Duncan Vintage stack in the bridge and they complement each other great. I had to modify the pickguard and do a tiny rout in the pickup cavity to be able to fit in the wiring coming out from the bottom of the pickup. I use 500K pots. It does not sound muddy at all and it has a great, punchy sound.It is extremely quiet and just slightly warmer than the regular tele pickup.Absolutely recommend. It sounds like a boutique pickup for 1/5 the price!I might use these pickups for other projects.

    S
    Sasa Miletic

    The pickup is surprisingly well made.I installed it as a neck pickup in my Thinline CV with Seymour Duncan Vintage stack in the bridge and they complement each other great. I had to modify the pickguard and do a tiny rout in the pickup cavity to be able to fit in the wiring coming out from the bottom of the pickup. I use 500K pots. It does not sound muddy at all and it has a great, punchy sound.It is extremely quiet and just slightly warmer than the regular tele pickup.Absolutely recommend. It sounds like a boutique pickup for 1/5 the price!I might use these pickups for other projects.

    E
    Eddie Rattlehead
    Great for Clean Tones

    I used this pickup in the neck position of my super-strat style guitar. There is no annoying noise, and the tone is punchy and clear. Especially worked well for clean tones. I would recommend.

    E
    Eddie Rattlehead
    Great for Clean Tones

    I used this pickup in the neck position of my super-strat style guitar. There is no annoying noise, and the tone is punchy and clear. Especially worked well for clean tones. I would recommend.

    S
    S. Brown
    This is a great pickup!

    This is a great pickup! Used in a short scale Bronco-type bass. It is strong and clear. Using with 250k pots. Includes a great wiring diagram and the packaging is very nice. Well protected and includes 2 sets of screws. 2 are tapered to fit a pick guard that has countersunk holes and 2 for a pickguard that does not have countersunk holes.This pickup is so good that I thought I had my pre-amp pedal on but I didn't.

    Reviews in Other Languages

    Translate