Musiclily Pro Chevalet Tune-o-matic Style Pigtail Réglable Enveloppant Écartement Cordes 52.5mm(2-1/16 pouce) pour Guitare Électrique Style Epiphone LP SG

Really impressed with how nicely this fit into my LP style Baldwin Signature Series. The hardware was actually nicer than the original bridge the guitar came with. I was able to use the existing bridge peg holes and the peg threads were exactly the same as the originals. This made for an easy swap out. I was replacing due to corrosion and verdigris on my old bridge.Thankfully no buzzing like others indicated, but that may be due to installation method. Using a flat head screwdriver and the provided hex key you are able to adjust bridge and dial in your string height and help avoid any fret/bridge buzz. There also appears to be little screws that can further adjust where the string rests, but I didn't need to use these.

We had an Epiphone Les Paul Junior guitar that came with a Rocksmith video game bundle. It was hard to play, badly intonated, ridiculously high action. We decided it would be a fun project to try to set up. So we lowered the action as much as possible -- we'd lower it further but the pickup height is quite high thanks to a mounting frame -- and it became much easier to play. Even better, we found out that with the lowered string height, the humbucker bridge pickup is quite hot and it makes it really fun to play and tap on this guitar. The only downside was that the intonation was way off and the tone was a little dull with the factory installed compensated bridge. For $14 we figured why not try out the Musiclily Pro 52.5mm Pigtail Style Tune-o-matic Wraparound Adjustable Bridge for Gibson Les Paul. It was a perfect fit in the Epiphone Les Paul Junior. We didn't need to install the threaded inserts, the existing bushing fit perfectly. It intontated beautifully. Even better, the tone brightened up dramatically, each note was clear and well articulated. Thanks to Rocksmith, you can find these Epiphone models all over the place for about $100 or even less. Lower the action and pop one of these bridges on and you have a guitar that plays like a $200-300 model. Great for any beginner and we enjoy the punch of the humbucker. My only critique has as much to do with the giant pickup mount on the guitar as much as the bridge, but the intonation screws for the bridge mount on the inside making it hard to fit a screwdriver in between the pickup and the bridge.

This was a perfect replacement for an Epiphone Les Paul Special that was likely the lowest priced of three Guitar Center exclusives. Easy to install and the bridge screw threads were a perfect match as a well. Instead of an extremely limited method for intonation and string height adjustments, this works much better for tuning accuracy. Highly recommended as a ��cheap�� but solid upgrade.

You can see the old wraparound bridge that came with the guitar but as hard as I tried I could not get any string in between the low and high E strings to intonate with it. Thankfully I got this Musiclily bridge for a lot less than what Hipshot wanted for something comparable. Once the new bridge arrived, it took about 15 minutes to get the old one off and new one on and the Gretsch was basically already perfectly intonated at the 12th fret. Please note while everything seems to be working excellent for now, I did notice some rattling from the springs around the intonation screws on the D and G string, but once I gave the screws the tiniest turn clockwise, the rattle went away. Locktite blue is supposed to help as well I've heard but hopefully no more issues here. Thanks for making an affordable solution, Musiclily.

Works really well on my Harley Benton DC Junior FAT.The saddle sits lower than the factory bridge so I had to raise the level of the posts to around half way (see pic). Otherwise perfect fit. I did get some fret buzz on string 2 and 1 after installing. Setting up the guitar with a relatively flat relief and ~1.6mm action height on both E strings got rid of that. I wasn't able to set up a practically acceptable action with no buzz with the original bridge.After setup, I adjusted the intonation. The adjustment has longer travel on this bridge. With the original, I wasn't able to properly intonate several strings, the travel was too short. Unfortunately accessing the intonation screws with the strings at full tension is not possible using a straight screwdriver because of the location of the pickup. Still, it wasn't much pain, as the factory-default compensation is very close and I guessed the required turns in a maximum of 2 iterations (1 on most strings).Some reviewers mentioned that the curvature does not follow the fret board radius. While this is true, it doesn't seem to affect playability (for me). Overall, this bridge is great upgrade for the HB DC JR FAT. The guitar came with 10-46 strings and I switched to 9-42 while installing. This addressed the sticky nut problem inherently present on the instrument. Now I'm pretty happy with the guitar, feels good that I was able to make it usable with such an inexpensive but decent quality upgrade.